您当前的位置 : 首 页 > 广州火焰设备

联系我们Contact Us

宁波北仓机械制造有限公司

宁波北仓机械制造有限公司

电话:0574-6246 0819

手机:13819815715

传真:0574-6246 9629

QQ:374475157

邮箱:374475157@qq.com

网址:www.glintsun.com

地址:余姚市马渚镇开元路90号

广州GS-500-4HCS (1)

广州GS-500-4HCS (1)

  • 所属分类:广州火焰设备
  • 浏览次数:
  • 发布日期:2022-09-17 14:44:30
  • 产品概述
  • 性能特点
  • 技术参数

GS-500-4HCS Round bottle Flame Treatment Machine

 

 

The PP plastic helmetsafety helmet needs to go through flame pretreatment before painting or printing to make the surface tension value above 48 dyne to ensure the adhesion of spraying or printing.

 

The flame pretreatment system of "Beicang Machinery" has sophisticated flame application technology; we have accumulated many years of experience, combined with advanced combustion safety control systems and spare parts. Each system is assembled and completed before leaving the factory. Strict quality inspection and testing to ensure its high quality

 

Industry Application

Flame treatment of polypropylene (PP) and polyethylene (PE) plastic surface is suitable for pipe/sheet surface treatment to increase the adhesion of printing and spraying and remove burrs; this equipment is specially designed for modification of helmets and safety helmets before painting Processing use.

 

Features  

Choose high-quality high-temperature corrosion-resistant belt chain plate transmission, can adjust the angle of four groups of nozzles arbitrarily to meet the needs of surface treatment of different shapes; flame system adopts PLC microcomputer electrical control, transmission part adopts advanced stepping motor, frequency conversion speed control Ways to adjust the speed to meet the different requirements of different workpieces.

 

"Beicang Machinery"'s proprietary flame injection process design burner effectively utilizes fuel efficiency to make its treatment effect higher; the flame system can use fuel LPG (liquefied gas) or Natural GAS (natural gas), propane; to ensure the safety of the system , The solenoid valve design is used on the gas circuit to ensure that the gas supply can be reliably shut down when abnormal; the whole machine has a novel structure, reasonable design, convenient operation, and movable casters at the bottom, which is convenient to move.

 

Adjustable rotation speed, automatic ignition function, adjustable stepping speed, safety net cover, gas leakage monitoring and alarm

 

technical parameter

Combustion nozzle size: a set of 300MM (NO.GS-D500TPS)

               200MM (NO.GS-D500TPS) one set

150MM (NO.GS-D150TPS) two groups

Combustion gas: LNG liquefied natural gas

Gas calorific value: LNG: 8700Kcal/m³

Maximum gas consumption: about LNG: 80L/min

Air consumption—maximum: 40m³/hr

Ignition mode, manual and automatic dual mode switching; controllable frequency of ignition and flameout

Combustion gas: compressed air 6KGf/CM2

Control voltage: 220V/50Hz;

Conveyor belt speed: 2-10m/min

Step speed: 0~999 seconds preset

Workpiece rotation: stepless speed regulation

Rotating fixture: 24PCS

Adjustment method: Conveyor belt frequency conversion speed regulation

Safety method: equipped with gas leakage monitor

Conveyor belt size: 2500×360mm (length×width)

Dimensions: 2500×1050×1950mm (length×width×height)

Weight: 350KG

 

 

 

 

GS-500-4HCS 头盔火焰处理机Round bottle Flame Treatment Machine

 

 

PP塑料头盔安全帽在喷漆或印刷前需经过火焰做前处理使表面张力值到48达因以上,来确保喷涂或印刷附着力

 

“北仓机械”之火焰前处理系统,拥有精细的火焰应用技术;我们累计多年的经验,结合先进的燃烧安全控制系统和零配件,每一套系统在出厂前,都是组装完成,并经过严格的品检与测试,以确保其品质优良

 

行业应用

聚丙烯(PP)、聚乙烯(PE)塑料表面火焰处理适合于管/片材表面处理,使之增加印字与喷涂的附着力及去除毛刺;此设备专为设计头盔、安全帽喷漆前改性处理使用。 

 

设备特点  
选用优质的高温耐腐带链板传送,可任意调整四组喷嘴的角度,来适应不同形状表面处理的需求;火焰系统采用PLC微电脑电器控制,传动部分采用先进的步进马达,变频调速的方式调整速度,以适用不同工件的不同要求。

 

“北仓机械”专有火焰喷射的工艺设计的烧嘴有效利用燃料效率使之处理效果更高;火焰系统可使用燃料LPG(液化瓦斯)或Natural GAS(天然气)、丙烷;为确保系统之安全,在燃气回路上使用电磁阀设计,以确保异常时能确实的关闭燃气供给;整机结构新颖、设计合理、操作方便、底部装有活动脚轮,移动方便。 

 

旋转速度可调、自动点火功能、步进速度可调、安全防护网罩、燃气泄漏监测报警

 

技术参数
燃烧喷嘴尺寸 300MMNO.GS-D500TPS)一组

               200MMNO.GS-D500TPS)一组

150MMNO.GS-D150TPS)二组
燃烧气体:LNG液化天然气

瓦斯热值:LNG:8700Kcal/m³

大瓦斯耗气量:约LNG:80L/min

空气消耗—大:40m³/hr 

点火方式,手动与自动 双模切换;点火与熄火频率可控
助燃气体:压缩空气6KGf/CM2

控制用电压220V/50Hz
输送带速度:2-10m/min

步进速度:0~999秒预设

工件自转:无极调速

旋转治具:24PCS
调整方式:输送带变频调速

安全方式:配置燃气泄漏监测仪
输送带尺寸:2500×360mm(长×宽)
外形尺寸:2500×1050×1950mm (长×宽×高)
重量:350KG

 


标签

上一篇:GS-600HPM (1)2022-09-17
下一篇:GS-400-4HCS (1)2022-09-17

火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机 13819815715

地址:余姚市马渚镇开元路90号
Q Q: 374475157
座机:0574-6246  0819
传真:0574-6246  9626