您当前的位置 : 首 页 > 产品中心 > 火焰设备
GS-1230-4HPM (1)

GS-1230-4HPM (1)

  • 所属分类:火焰设备
  • 浏览次数:
  • 发布日期:2021-12-28 10:28:04
  • 产品概述
  • 性能特点
  • 技术参数

Beicang Machinery Manufacturing Flame Pretreatment System (Brand: GSI Flame Treatment)

GS-360-4PM anchor rod heat shrinkable film flame treatment

Different anti-corrosion measures are adopted for bolt components with different corrosion mechanisms in different parts, and their anti-corrosion cost performance is much higher than traditional anti-corrosion measures; the full length of the anchor rod adopts flexible anti-corrosion measures such as heat shrinkable film and anti-corrosion grease.

Steel surface degreasing process During the process of processing, transportation, and storage of steel, the surface often has some oil stains, such as anti-rust oil applied for rust prevention, lubricating oil, chip oil, polishing paste applied for mechanical processing, Sweat, asphalt, etc. contaminated during handling. The presence of these oil stains will affect the quality of rust removal and phosphating, and reduce the bonding force between the coating and the substrate. The method of degreasing before painting Beicang company recommends flame metal surface treatment.

Flame treatment technology is widely used in metal heat treatment processes, such as steel plate surface degreasing, metal heat treatment, welding preheating, welding, secondary heating of metal processing, surface hardening, stress relief, etc., and flame treatment of metal zero The improvement of the physical properties of the parts facilitates further processing.

Flame treatment characteristics:

Shorten the heating time and increase the temperature quickly, effectively increase the hardness of the metal, and improve the fatigue strength of the metal

Product Features:

The use of high-strength and pressure-resistant aluminum alloy shell is light and safe, multi-row anti-blocking flame spray hole structure, indoor flame design; stainless steel fracture sealing pad is easy to disassemble, assemble and repair; pull-out adjustment baffle can effectively control the width of the flame and simple operation; -Style precision gas confluencer; easy to adjust the flow of gas and compressed air, including anti-reverse flow function; easy to operate both plug and play; recommended for fixed position use; optional electronic ignition device or installation of safety monitoring and detection system and precision flow control system.

 

Some parameters:

Flame temperature: oxidizing flame 1000~1200℃

Flame width: four groups of standard flame burner 150mm, adjustable flame width (no.GS-150PTS)

Flame thickness: standard 22MM

Ignition method: high frequency electronic single needle ignition; OK

Combustion gas: standard petroleum gas or natural gas

Combustion-supporting gas: compressed air 8KGf/CM2 is recommended to be connected to a stable and clean air source

Assembly and fastening: M5 bolts of flame window tightly inserted plate, M10 of mixed gas interface

Power supply: 220V/50Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

北仓机械制造火焰前处理系统 (品牌:GSI 火焰处理

 

GS-360-4PM锚杆热缩膜火焰处理  

针对不同部位不同腐蚀机理的锚杆组件采取不同的防腐措施,其防腐性价比要远高于传统的防腐措施;锚杆全长采用热缩膜和涂防腐油脂的柔性防腐措施

 

钢铁表面除油工艺钢铁在加工、运输、储藏的过程中,表面往往会带有一些油污,例如由于防锈需要所涂的防锈油,机械加工所涂的润滑油、切屑油、抛光膏,搬运过程中污染上的汗水、沥青等。这些油污的存在会影响除锈及磷化的质量,降低涂层与基体间的结合力。喷漆前除油的方法北仓公司推荐火焰金属表面处理。

 

金属的热处理工艺中火焰处理技术应用广泛,如钢板表面去油腻、金属热处理,焊接预热、焊接、金属加工的二次补热、表面淬硬、应力消除等工艺应用,经火焰处理的金属零部件的物理特性得到改善有利于进一步深加工。

 

 

火焰处理特点:

加热时间缩短快速升温、有效提高金属硬度、改善金属抗疲劳强度

 

产品特性:

采用高强耐压铝合金外壳体轻便安全,多排防阻塞火焰喷孔结构,室内型火焰设计;不锈钢断口密闭垫便于拆卸装配修整;抽拉式调节档板可有效控制喷火宽度操作简单;一体式精密气体汇流器;便于调节燃气与压缩空气流量,含防逆流功能;既插既用操作简单;建议固定位置使用;可选配电子式点火装置或加装安全监测与检测系统与精密流量控制系统。

 

部分参数:

火焰温度:氧化火焰1000~1200

火焰宽度:标型火焰烧嘴150mm四组,喷火宽度可调no.GS-150PTS

火焰厚度:标准22MM

点火方式:高频电子式单针点火;OK

燃烧气体:标准石油气或天然气

助燃气体:压缩空气8KGf/CM2建议接入稳定洁净气源

装配紧固:火焰窗紧密插板M5螺栓、混合气体界面M10
电源:220V/50Hz

 


标签

上一篇:没有了
下一篇:GS-700-2HPM (1)2021-12-28

火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机 13819815715

地址:余姚市马渚镇开元路90号
Q Q: 374475157
座机:0574-6246  0819
传真:0574-6246  9626