您当前的位置 : 首 页 > 产品中心 > UV固化设备

GS-700-2PM (1)

2021-12-28 10:25:14
GS-700-2PM (1)
详细介绍:

GS-700-2PM low temperature dual lamp flat UV curing machine

 

Product application

This UV curing machine is specially designed for curing and drying after UV screen printing of small motor shell logo and decorative pattern. It is also suitable for UV glue curing and screen printing UV ink curing

 

Application examples: screen printing, lithography, relief printing, self-adhesive trademark, metal nameplate, KT board, glass, ceramics, electronic parts, single-sided circuit board and other substrates are printed with special effects such as crystal ice flower, frosting, crystal gem, colorful convex oil and so on. Coating: bright coating on wood surface, paper polishing, plastic floor and optical fiber line surface coating.

 

Product features

Two groups of UV lamps are configured, which can be controlled separately. The distance between the UV lamp and the strip surface is adjustable. The focusing reflector is configured, and the illumination is uniform; The upper exhaust air and lower suction air are used together, and the cooling system is reasonable to make the UV lamp irradiate at full power; The adjustable light box design is convenient for the wiping of UV lamp and reflector and the replacement of UV lamp, and the maintenance is simple. Various station fixtures can be installed on the conveyor belt according to customer requirements, and the conveying speed can be adjusted within the effective range; The main components adopt standard configuration to ensure stable performance.

 

  Custom length, height or width

  Stainless steel clean room applications

 UV/IR combination available

 Nitrogen curing environment optional

 Reciprocating lamps option (heat sensitive curing) • Designed for microwave or mercury arc UV curing systems

 5-160 FPM variable speed control with FPM indicator • Adjustable height: 29” - 41”

 Maximum vacuum hold-down area

 300 and/or 400 W/inch output

 Mercury/metal halide lamps

 UV-resistant coated fiberglass belt

 

Technical parameter

Power requirements: three phase five wire 380VAC (power frequency AC) 50Hz (Hz)

Overall power: about 16.5kw (kw)

Overall dimension: 3600 L (length) × 980 (width) × 1780h (height) mm

Conveying speed: 2-11m / min (M / min)

Conveying width: 700mm (mm)

Mesh belt material: Teflon mesh belt or stainless steel mesh belt

Lamp line power: 100W / cm

Light source configuration: 2, 7.2kw

Service life of light source: more than 1000 (H) hours on average, and the light attenuation shall not be less than 80%

Main peak wavelength: 365nm (nm)

Power regulation: 100% full power

 

 

 

 

 

 

 

GS-700-2PM 低温款双平面UV固化线 FLAT UV Curing Machine

 

产品用途 Application
此紫外线固化机,专为小家电机外壳LOGO及修饰花纹UV丝印后固化干燥设计,适合UV胶水固化,丝印UV油墨固化

应用实例:网版印刷、平版印刷、凸版印刷、自粘商标、金属铭牌、KT板、玻璃、陶瓷、电子零件、单面电路板等基材上印制晶体冰花、磨砂、水晶宝石、七彩凸油等特殊效果。涂装方面:木材表面光亮涂装、纸面上光、塑胶地板、光纤线表面涂装。

 

产品特点 Feature
双组UV灯配置,可分别控制,UV灯距板带面距离可调,聚焦型反射装置配置,光照均匀;上排风及下吸风配套使用,冷却系统合理,使UV灯满功率辐照;调式灯箱设计,便于UV灯和反射罩擦拭及UV灯的更换,维护简便。输送带上可按客户要求安装各种工位治具,输送速度在有效范围内均可调节;主要组件采用标准配置,确保性能稳定。

 

  Custom length, height or width

  Stainless steel clean room applications

 UV/IR combination available

 Nitrogen curing environment optional

 Reciprocating lamps option (heat sensitive curing) • Designed for microwave or mercury arc UV curing systems

 

 5-160 FPM variable speed control with FPM indicator • Adjustable height: 29” - 41”

 Maximum vacuum hold-down area

 300 and/or 400 W/inch output

 Mercury/metal halide lamps

 UV-resistant coated fiberglass belt

 

技术参数 Parameter
电源要求:三相五线380VAC(工频交流) 50HZ(赫兹)
整机功率:16.5KW(千瓦)
外形尺寸:3600 L(长)×980(宽)×1780H(高) mm
输送速度:2-11m/min(米/分钟)
输送宽度:700mm(毫米)
网带材料:特氟龙网带不锈钢网带
灯线功率:100w/cm
光源配置:2支,7.2KW
光源寿命:平均大于1000h)小时,光衰不低于80
主峰波长:365nm(纳米)
功率调节:100%满功率
UV灯反射罩:铝合金反射罩配合镀钛反射铝片,装CF冷镜以利于无尘洁净度及降低产品表面温度。

光源类型:高压Hg汞灯

冷却方式:强制风冷

传动系统:齿轮减速机、链轮;输送速度:2-11m/min VR无级调速,LED数字式速度显示。输送方向面对机台控制面板由左往右输送

控制面版:UV灯电流表、点灯运转积时器、超温指示灯、点灯完成指示灯、

电源指示灯、启动开关、停止开关、UV灯开关、强弱光切换开关。

典型应用:适应于非防爆要求环境

 

 

 

 

 

 


标签

上一篇:GS-800-4PM (1)2021-12-28
下一篇:GS-500-2PM(1)2021-12-28

火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机,火焰处理机,UV光固化机,等离子处理机 13819815715

地址:余姚市马渚镇开元路90号
Q Q: 374475157
座机:0574-6246  0819
传真:0574-6246  9626